Enduro Bearings BB Kit for Shimano 24mm cranksets and BB86/92 cups

Name: Enduro Bearings BB Kit for Shimano 24mm cranksets and BB86/92 cups
Brand: Enduro
SKU: EB-9728
Price: 270 EUR
Availability: InStock
Rating: 5 (1 reviews)

270,00€

BKC-54115 – XD15 Ceramic-Hybrid, ABEC-5 Bottom Bracket Bearing Kit for Shimano 24mm cranksets and BB86/92 cups – Enduro′s top of the line BB bearing kit, we couple our XD15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation. An Enduro Bearings exclusive, our XD15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 5 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use. We are so confident in the performance of XD15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. – Find out why Bike Radar reported the XD15 Hands down, the best bottom bracket we have ever tested. We are sure you will agree, and with a lifetime warranty there is nothing to lose. For the easiest removal and installation of this bearing kit, we recommend the BRT-003 24m x 37mm bearing tool. BRT-003 allows you to quickly remove and install bearings with a few twists of the wrist. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements. Lue vähemmän

Varastossa

Seal Types:
2RS – 2 Rubber Seals | 2 kumitiivistettä
LLB – Medium Contact Seal. Well suited for Hubs | Keskikontaktitiiviste. Sopii hyvin napoihin
LLU – Full Contact Seal. Better for suspension pivots | Täyskosketustiiviste. Sopii paremmin jousituksen niveliin
VV – Light Contact Seal | Kevytkosketustiiviste
SRS – Snap Ring Seal | Lukkorengastiiviste
LLU/LLB – Dual Seal Bearing (One seal type per bearing side) | Kaksoistiiviste, eri tiivistetyyppi kummallakin puolella

Treatments / Coatings:
BO – Black Oxide Treatment. Corrosion resistant coating | Mustaoksidointi. Korroosiosuojaava pinnoite

Bearing Types:
(6)801 – 6 Single Row Bearing | Yksirivinen laakeri
6(3)801 – 3 Wide Single Row Bearing | Leveä yksirivinen laakeri
(3)801 – 3 Double Row Bearing | Kaksirivinen laakeri
6(1)801 – 1 ABEC-5 Bearing | ABEC-5-tarkkuuslaakeri
(7)1801 – 7 Angular Contact Bearing. Specifically designed for hubs | Kulmakosketuslaakeri, suunniteltu navoille
(S)6801 – S Stainless steel bearing | Ruostumattomasta teräksestä valmistettu laakeri
MR – Metric Roller | Metrinen laakeri
MRA – Metric Roller Angular Contact. Specifically designed for hubs | Metrinen kulmakosketuslaakeri, navoille
SMR – Stainless Steel Metric Roller | Ruostumattomasta teräksestä tehty metrinen laakeri
SMRA – Stainless Steel Metric Roller Angular Contact | Ruostumaton metrinen kulmakosketuslaakeri
DR – Double Row | Kaksirivinen laakeri
A5 – ABEC-5 Bearing | ABEC-5-tarkkuuslaakeri
ACB – Angular Contact Bearing | Kulmakosketuslaakeri
Radial – Radial Bearing | Radiaalilaakeri (kantaa pääasiassa radiaalikuormaa)

Specialty Bearings / Ceramics:
CH – Ceramic Hybrid. ABEC-5 tolerance, LLB Seals, Graphite Nylon retainer. | Keraamihybridi. ABEC-5-tarkkuus, LLB-tiivisteet, grafiittinailonpidin.
CO – Ceramic Zero. Comes close to magic ″zero″ rolling resistance number. | Ceramic Zero. Erittäin alhainen vierintävastus.
CXD – XD-15 Ceramic. Longest lasting, speediest ceramic bearing available | XD-15-keraamihybridi. Kestävin ja nopein saatavilla oleva keraamilaakeri.
SXD – XD-15 Stainless Steel Bearing | XD-15-ruostumaton teräslaakeri
MAX – Max suspension pivot bearing. Designed specifically for suspension pivots. | MAX-laakeri. Suunniteltu erityisesti jousituksen linkuston niveliin.

Races & Flanges:
E – Extended Inner Race | Pidennetty sisärengas
EE – Double Extended Inner Race (extends on both sides) | Pidennetty sisärengas molemmin puolin
F – Flanged Bearing | Laipallinen laakeri
FE – Flanged Extended Inner Race | Laipallinen, pidennetty sisärengas
FO – Flanged Offset Bearing | Laipallinen, siirretty sisärengas

Shields:
1Z – Single-side Grease Shield | Yksipuolinen rasvasuoja
ZZ – Dual Side Grease Shield | Kaksipuolinen rasvasuoja

Materials:
CC – High Chromium Steel Bearing | Korkeakromiteräslaakeri
SS – Stainless Steel Bearing | Ruostumaton teräslaakeri