Enduro Bearings ACB 3645 Headset Bearing - 30.2x41x6.5 | IS41/28.6 (36x45)

Enduro Bearings ACB 3645 Headset Bearing – 30.2x41x6.5 | IS41/28.6 (36×45)

Hintaluokka: 20,00€ - 32,00€

ACB 3645 CC SS – 1-1/8 440C stainless steel Angular Contact Headset bearing – (30.2mm x 41mm x 6.5mm: 36 x 45 deg) – 1-1/8 Angular Contact Internal Headset Bearing featuring 440C stainless steel balls and races to provide superior corrosion resistance. This size bearing is also known in the bike Industry by these part numbers: 27287-1046-004 HSS0130K TH-873E MR-122 Not all stainless steel is created equal. – Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. 440C has the highest strength, hardness, and wear resistance of all the standard 440-series stainless alloys with high carbon content. As expected, it is also the most expensive of the 440 series alloys and requires multiple rounds of heat treatment and cryogenic treatment to achieve its superior mechanical properties. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine grease in these bearings to additionally water proof against the elements. Enduro 440C stainless headset bearings are the same bearings found in many popular headset brands, including those that carry a 110 year warranty. All Enduro stainless headset bearings carry a limited lifetime warranty. – The Enduro line of headset bearings consists of two basic performance levels that are a substantial step up from standard bike industry specifications. Enduro ″entry-level″ headset bearings feature premium materials like Black-Oxide treated races and carry a two year warranty, while our premium 440C stainless headset bearings carry a full lifetime warranty. All Enduro bearings are always engineered with the largest balls possible and feature dual lip labyrinth seals for maximum protection against sweat and the elements and to contain the 90% high pressure water proof grease, keeping everything running smoothly for the duration. The Angular Contact (A/C) design of Enduro headset bearings allow all balls in the bearing to engage the load, spreading the force over a larger surface area minimizing any possibility of premature wear and greatly extending bearing life. Static load – 935lbf / 4.15kN – Weight – 19.24g – Lue vähemmän

Materiaali

Mustaoksidoitu teräs
Ruostumaton Teräs

Poista

Seal Types:
2RS – 2 Rubber Seals | 2 kumitiivistettä
LLB – Medium Contact Seal. Well suited for Hubs | Keskikontaktitiiviste. Sopii hyvin napoihin
LLU – Full Contact Seal. Better for suspension pivots | Täyskosketustiiviste. Sopii paremmin jousituksen niveliin
VV – Light Contact Seal | Kevytkosketustiiviste
SRS – Snap Ring Seal | Lukkorengastiiviste
LLU/LLB – Dual Seal Bearing (One seal type per bearing side) | Kaksoistiiviste, eri tiivistetyyppi kummallakin puolella

Treatments / Coatings:
BO – Black Oxide Treatment. Corrosion resistant coating | Mustaoksidointi. Korroosiosuojaava pinnoite

Bearing Types:
(6)801 – 6 Single Row Bearing | Yksirivinen laakeri
6(3)801 – 3 Wide Single Row Bearing | Leveä yksirivinen laakeri
(3)801 – 3 Double Row Bearing | Kaksirivinen laakeri
6(1)801 – 1 ABEC-5 Bearing | ABEC-5-tarkkuuslaakeri
(7)1801 – 7 Angular Contact Bearing. Specifically designed for hubs | Kulmakosketuslaakeri, suunniteltu navoille
(S)6801 – S Stainless steel bearing | Ruostumattomasta teräksestä valmistettu laakeri
MR – Metric Roller | Metrinen laakeri
MRA – Metric Roller Angular Contact. Specifically designed for hubs | Metrinen kulmakosketuslaakeri, navoille
SMR – Stainless Steel Metric Roller | Ruostumattomasta teräksestä tehty metrinen laakeri
SMRA – Stainless Steel Metric Roller Angular Contact | Ruostumaton metrinen kulmakosketuslaakeri
DR – Double Row | Kaksirivinen laakeri
A5 – ABEC-5 Bearing | ABEC-5-tarkkuuslaakeri
ACB – Angular Contact Bearing | Kulmakosketuslaakeri
Radial – Radial Bearing | Radiaalilaakeri (kantaa pääasiassa radiaalikuormaa)

Specialty Bearings / Ceramics:
CH – Ceramic Hybrid. ABEC-5 tolerance, LLB Seals, Graphite Nylon retainer. | Keraamihybridi. ABEC-5-tarkkuus, LLB-tiivisteet, grafiittinailonpidin.
CO – Ceramic Zero. Comes close to magic ″zero″ rolling resistance number. | Ceramic Zero. Erittäin alhainen vierintävastus.
CXD – XD-15 Ceramic. Longest lasting, speediest ceramic bearing available | XD-15-keraamihybridi. Kestävin ja nopein saatavilla oleva keraamilaakeri.
SXD – XD-15 Stainless Steel Bearing | XD-15-ruostumaton teräslaakeri
MAX – Max suspension pivot bearing. Designed specifically for suspension pivots. | MAX-laakeri. Suunniteltu erityisesti jousituksen linkuston niveliin.

Races & Flanges:
E – Extended Inner Race | Pidennetty sisärengas
EE – Double Extended Inner Race (extends on both sides) | Pidennetty sisärengas molemmin puolin
F – Flanged Bearing | Laipallinen laakeri
FE – Flanged Extended Inner Race | Laipallinen, pidennetty sisärengas
FO – Flanged Offset Bearing | Laipallinen, siirretty sisärengas

Shields:
1Z – Single-side Grease Shield | Yksipuolinen rasvasuoja
ZZ – Dual Side Grease Shield | Kaksipuolinen rasvasuoja

Materials:
CC – High Chromium Steel Bearing | Korkeakromiteräslaakeri
SS – Stainless Steel Bearing | Ruostumaton teräslaakeri

Malli	Irtolaakeri
Materiaali	Mustaoksidoitu teräs, Ruostumaton Teräs
Sisähalkaisija	30.2mm
Ulkohalkaisija	41mm
Leveys	6.5mm
Merkki	Enduro
Ohjainputki
Koko	30.2x41x6.5
Standardi	IS41/28.6 (36×45)
Suojaus	Black-Oxide Steel – ACB, Stainless Steel – ACB
EAN	810191013440
Valmistajan koodi	ACB 3645 BOCC-bag