The BKM-1.2 is built for the rigors of daily commercial use, and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.

Two 20 mL syringes
Two hose assemblies with shutoff clips
One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems
One open-ended hose assembly
Bleed funnel with stopper
Two 10 mm/12 mm universal bleed blocks
Two 11 mm bleed blocks
Two adjustable syringe holders
M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2)
M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes®, Nutt® (x2)
M6 x 0.75 adapter — Magura®
M6 x 1.0 adapters — universal (x2)
M6 x 1.0 adapter — Promax®
M7 x 0.75 adapter — Shimano®
Hose compression sleeve — universal
Fluid disposal bag
Set of spare O-rings and hose
Replacement parts available
Brake fluid not included
NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.