e*spec is a new category of components designed to withstand the added demands put on components by the extra weight and torque of eBikes. e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection. All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus.
Sisältäen alv 24.00 %
Tilapäisesti loppu, kysy lisätietoja myymälästä
Steel axle w/pinch bolt
28h front, 32h rear
e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanism is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.
e*spec rear hub, specially designed for eBike use.
Wheels w/driver body (taped w/tubeless valves installed), spoke x3, nipple x3, nipple washer x3,
Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers
Weight: (w/valves + tape) 2,140g
29 Wheel(s): 30mm internal width